C3 Diesel Concrete Mixer With Pump
The c3 diesel concrete mixer with pump is started by a diesel engine, and during use, it needs to be inspected and maintained daily. Specifically, the daily maintenance steps of the diesel version of the concrete mixer pump are as follows:
1, Check whether the diesel engine oil in the concrete mixer pump is at the specified oil level and needs to be kept at the oil level.
2, Check whether the antifreeze in the water tank of the diesel concrete mixer with pump is in the normal required position.
3, Check whether there is enough diesel in the diesel tank, make sure the container and oil quality are clean, whether the fuel supply valve has been opened, and confirm that there is no air in the diesel pipeline.
4, Check the air filter, clean or replace the air filter core.
5, Release the deposits or deposits in the fuel tank and fuel filter.
6, The oil filter element of the new diesel c3 concrete mixer with pump needs to be replaced after 30-50 hours of cumulative operation for the first time, and then replaced every 200-250 hours or once a month.
7, Replace the diesel engine oil with a new one after 30-50 hours of accumulative working for the first time, and replace it with a new one when the engine oil is not working for 200-250 hours or when the oil pressure is less than 0.3MPA.
8, Diesel version of the concrete mixer with pump is suspended to connect to the conveying pipeline, and it needs to be supported by other materials to ensure the shaking of the conveying pipeline during the pumping process, which causes the conveying pipe to become loose.
9, Before the daily construction of the diesel version of the c3 concrete mixer pump, one side of the fine stone mortar needs to be pumped to moisten the pipe, and one side needs to be pumped after the construction.
10, After the daily construction is completed, the c3 diesel concrete mixer with pump needs to be thoroughly cleaned to prevent the concrete from solidifying in the pump.
1, Check whether the diesel engine oil in the concrete mixer pump is at the specified oil level and needs to be kept at the oil level.
2, Check whether the antifreeze in the water tank of the diesel concrete mixer with pump is in the normal required position.
3, Check whether there is enough diesel in the diesel tank, make sure the container and oil quality are clean, whether the fuel supply valve has been opened, and confirm that there is no air in the diesel pipeline.
4, Check the air filter, clean or replace the air filter core.
5, Release the deposits or deposits in the fuel tank and fuel filter.
6, The oil filter element of the new diesel c3 concrete mixer with pump needs to be replaced after 30-50 hours of cumulative operation for the first time, and then replaced every 200-250 hours or once a month.
7, Replace the diesel engine oil with a new one after 30-50 hours of accumulative working for the first time, and replace it with a new one when the engine oil is not working for 200-250 hours or when the oil pressure is less than 0.3MPA.
8, Diesel version of the concrete mixer with pump is suspended to connect to the conveying pipeline, and it needs to be supported by other materials to ensure the shaking of the conveying pipeline during the pumping process, which causes the conveying pipe to become loose.
9, Before the daily construction of the diesel version of the c3 concrete mixer pump, one side of the fine stone mortar needs to be pumped to moisten the pipe, and one side needs to be pumped after the construction.
10, After the daily construction is completed, the c3 diesel concrete mixer with pump needs to be thoroughly cleaned to prevent the concrete from solidifying in the pump.
For Price Plz Contact Whatsapp/Wechat: 0086 181 3788 9531
Or Email to nydia@concretebatchplant24.com
评论
发表评论